LED strip power supply 24V 360W 15A IP20 (Optonica 6153) — LED strip power supply 24V 360W 15A IP20 (Optonica 6153) is a high-power constant-voltage supply for 24V LED strips, modules and other compatible LED systems. The metal enclosure and integrated fan provide active cooling for higher-load installations. is a power supply for stable operation of low-voltage LED systems. It converts mains voltage to the required DC output for compatible LED strips, modules or other devices.

Design and functionality

The housing and rated output are intended for technical installation with adequate ventilation and load reserve. Correct power-supply selection supports stable and safe operation of the LED system.

Recommended applications

Suitable for furniture, niche, signage, decorative and technical LED-lighting projects.

Selection and compatibility

The output voltage must exactly match the nominal voltage of the LED system. The total connected load must remain below the rated output; for continuous operation, a reserve of approximately 15–20% is recommended.

Technical specifications

• Jauda: 360 W
• IP klase: IP20
• Paredzētais spriegums: AC 220 V input / 24 V DC output
• Izmēri (AxPxG): 215 × 114 × 50 mm
• Korpusa materiāls: Aluminium
• Svars: 600 g net / 660 g gross
• Garantijas periods: 2 years
• Izejošā strāva: 24 V DC / 15 A
• Ienākošā strāva: AC 220 V, 50–60 Hz
• Manufacturer code: 6153

Installation and use

Install in a dry, ventilated and service-accessible location. Do not exceed the rated load, allow a suitable power reserve and have the mains connection completed by a qualified installer.

Care and safety

Clean the housing and visible surfaces with a soft dry or slightly damp cloth, without abrasive or aggressive cleaning products. Disconnect the power before cleaning or maintenance and check that the fixings and connections are not damaged.