DALLA square recessed fitting, Gx5.3, IP20, white/black (Kanlux)
Available Options
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Number of bulbs 1
- Max. power max 10 W
- Voltage 12 V AC/DC
- Housing colour White or black — as selected in options
- Housing material aluminum
- Dimensions (L×W×H) 82 × 82 × 26 mm
- Mounting type Recessed mounting
- IP rating IP20
- Weight 86 g
- Warranty 2 years
- Socket Gx5,3
- Included No
- Type MR16/Gx5.3 bulb
- Installation Recessed in the ceiling
- Recessed depth Body 26 mm; total installation clearance — see instructions
- Material aluminum
- Cut-out diameter Ø70 mm
Product Description
DALLA — square recessed fitting with an adjustable ring
Kanlux DALLA CT-DTL50-W is an aluminium-alloy fitting for one replaceable MR16 lamp. Its inner ring tilts by 30° on one axis to adjust the direction of the light. Select white or black in the “Colour” option on this page. The offer is for one fitting in the selected colour.
Dimensions and ceiling cut-out
Overall dimensions: 82 × 82 × 26 mm. Required ceiling cut-out: Ø70 mm. The 82 mm outer dimension must not be used as the cut-out diameter. The 26 mm body height is not the total installation clearance: allow space for the lamp, holder and wiring as required by the installation instructions.
Lamp and connection
The manufacturer’s sheet for this CT version specifies a Gx5.3 holder, 12 V AC/DC and max. 10 W. The lamp is not included. Colour temperature, brightness and beam angle depend on the selected lamp. Do not connect the specified Gx5.3 assembly directly to 230 V; use a suitable 12 V supply for the selected lamp. GU10 is a different holder and is not promised as part of this product’s standard configuration.
Material and use
IP20 — dry indoor locations. The aluminium-alloy body forms a discreet ceiling detail. Do not cover it with thermal insulation. Disconnect power and let the lamp cool before replacing it. A non-standard configuration with a separate GU10 holder must be confirmed before ordering.
