LED street light 100W, 15000lm, 4000K, IP65, grey (Optonica 9225)
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Voltage 180–265 V AC
- Housing colour Grey
- Housing material Aluminium
- Adjustable light direction Adjustable mounting angle 0–90°
- Diffuser material Polycarbonate (PC) lens
- Dimensions (L×W×H) 404 × 206 × 70 mm (manufacturer / EPREL)
- Mounting type Pole / mounting bracket
- IP rating IP65
- Operating temperature (Ta) −20…+40 °C
- Weight Net 2070 g
- Warranty 5 years (manufacturer specification)
- Type of diodes Lumileds
- Wattage 100 W
- Luminous flux 15000 lm
- Luminous efficacy (lm/W) 150 lm/W
- Colour temperature (CCT) 4000 K
- Light colour Neutral white
- Beam angle 75° × 130°
- Colour rendering index (CRI/Ra) ≥80
- Colour consistency (SDCM) 6 (EPREL)
- Mains frequency 50–60 Hz
- Dimmable No
- Energy class D
- Energy consumption (kWh/1000 h) 100
- Rated Lifetime (hours) 35 000
- Switching cycles 35 000
- Start-up time 0.1 s
Product Description
LED street and area light — Optonica 9225
Optonica 9225 is a grey LED luminaire for streets, access roads and car parks. Lumileds LEDs deliver 15 000 lm at 100 W. This version provides 4000 K neutral white light with an efficacy of 150 lm/W.
Light direction and application
The 75° × 130° asymmetric light distribution is intended for roads and outdoor areas. An adjustable mounting angle of 0–90° allows the luminaire position to be set; this does not change the optical beam angle. Select pole height, placement and spacing according to the lighting requirements of the specific site.
Housing and service
An aluminium housing, polycarbonate lens and IP65 protection are specified for outdoor use. The operating temperature range is −20 to +40 °C; the manufacturer states a 35,000-hour service life. Colour rendering is CRI ≥80 and energy efficiency class is D. Net weight is approximately 2.07 kg.
Connection and pre-purchase checks
Supply: 180–265 V AC, 50–60 Hz. The luminaire is not dimmable. Check compatibility with the selected pole or bracket. Installation and the earthed electrical connection must be completed by a qualified electrician, following the manufacturer instructions and providing suitable outdoor connection protection.
Confirm dimensions before ordering: the manufacturer specification and EPREL list 404 × 206 × 70 mm, whereas the supplied drawing shows an overall length of 550 mm including the bracket. The source dimensions are not fully consistent and must not be treated as interchangeable mounting measurements.
EPREL specifies 6 SDCM colour consistency and a 0.90 displacement factor (cos φ₁). A suitable IP65 junction box is required for connection and is not included.
Manufacturer warranty: 5 years, subject to its terms. Poles shown in the images are not listed as included components. Application illustrations are not measurements of the exact light colour or the resulting illumination.
The manufacturer states 70% lumen maintenance at the end of service life. Connection cable length: 30 cm.
Documents
EPREL registration and product information sheet
Energy label (PDF)
Installation instructions (EN, PDF)
EMC document (PDF)
LVD document (PDF)
Series video
