LED Solar Floodlight IP65 with Sensor & Remote, CCT, 20W
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Housing colour Black
- IP rating IP65
- Operating temperature (Ta) -20…+40 °C
- Remote control included Yes
- Wattage 20 W
- Luminous flux 4800 lm
- Luminous efficacy (lm/W) 240 lm/W
- Colour temperature (CCT) 3000 / 4000 / 6000 K (3CCT)
- Beam angle 120°
- Colour rendering index (CRI/Ra) ≥80
- Voltage DC 5V
- Switching cycles 25000x
- Dimensions (H×W×L) 280×60×215 mm
- SKU 15405
- EAN 3801057154053
- Sensor type PIR
- Twilight setting ON <10 lx; OFF >40 lx
- Settings Not adjustable
- Time setting 20 s
- Detection range (m) 8–10 m
- Battery voltage (V) 3.2 V
- Battery capacity (mAh) 15000 mAh
- Housing material ABS
Product Description
OPTONICA 15405 is a 20 W solar LED floodlight with a motion sensor, solar panel and remote control. It is intended for lighting a yard, access area or utility zone without installing a separate mains supply. This is a complete light fitting, not an LED-strip control device.
Selectable light colour and motion detection
The model has a specified 4800 lm luminous flux and three light colours: 3000 K, 4000 K and 6000 K. Its PIR motion sensor provides automatic switching according to the selected operating mode. A remote control is included. Detection depends on the mounting location and direction of movement.
Technical information
- Model: 15405
- EAN: 3801057154053
- Power: 20 W
- Luminous flux: 4800 lm
- Colour temperature: 3000 / 4000 / 6000 K (3CCT)
- Beam angle: 120°
- IP rating: IP65
- Colour rendering index: CRI ≥80
- Body: Black ABS
- Battery voltage: 3.2 V
- Battery capacity: 15 Ah (15000 mAh)
- Specified input voltage: 5 V DC
- Dimensions: 280 × 60 × 215 mm
Solar-panel positioning
Place the panel where it receives good daylight. Operating time and available brightness depend on solar input, battery charge, temperature and the mode in use. Do not connect the low-voltage fitting directly to a 230 V supply. Follow the instructions supplied for the exact model.
