AXELLE ceiling light LED 24 W 2700 K 3 StepDim white (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Number of bulbs 1
- Voltage 230 V
- Housing colour White
- Housing material Synthetic / Metal
- Light direction Diffuse light
- Adjustable light direction Fixed
- Dimensions (L×W×H) 394 × 394 × 46 mm
- Height adjustable Not height-adjustable
- IP rating IP20
- Protection class (electrical) II
- Lamp has a switch 3 StepDim via wall switch
- Control method Wall switch
- Dimming method Wall switch; 3 StepDim (three brightness levels)
- Weight 2.63 kg
- Warranty 3 years
- Wattage 1 × 24 W
- Luminous flux 1 × 1300 lm
- Colour temperature (CCT) 2700 K
- Light colour Warm white
- Beam angle 120 °
- Colour rendering index (CRI/Ra) 80
- Dimmable Yes
- Energy class G
- Rated Lifetime (hours) 30000 h
- Switching cycles 15000
- Socket Integrated LED
- Included Yes
Product Description
Lucide AXELLE is a white, low-profile square ceiling light with a synthetic body and metal mounting plate. Its simple form and white light-diffusing surface suit a hallway, bedroom or living space that needs visually discreet ceiling lighting. The shallow projection is useful where ceiling height is limited.
The fitting contains 1 integrated LED source, rated at 24 W and 1,300 lm. Watts describe electrical power, while lumens help assess source brightness. The LED source is included and separate bulbs are not required.
The colour temperature is 2700 K — warm white. Kelvins describe the white-light tone rather than brightness. Colour temperature is fixed, so dimming changes brightness while retaining the same white tone.
CRI 80 describes colour rendering compared with reference light. It helps assess how surrounding objects will appear under the light. The LED source’s 120° beam angle indicates broad light distribution.
The manufacturer’s rated LED lifespan is up to 30,000 h. This describes accumulated operating hours, not the warranty period. The specification also states 15,000 on/off cycles, a separate switching-endurance measure that should not be confused with operating hours. The source’s energy efficiency class G on the A–G scale helps compare efficiency; class A is the most efficient on this scale. The energy label is separate from electrical protection class.
3 StepDim through the wall switch selects 100%, 40% or 10% brightness. This stepped adjustment uses a standard light switch to move from everyday light to a softer evening setting. The fitting is fixed, without a rotating head or sensor.
Overall dimensions are 39.4 × 39.4 × 4.6 cm (length × width × height), and net weight is 2.63 kg. The structural height is fixed; allow clearance for the complete fitting when choosing a location.
Ceiling mounting plate dimensions are 32 × 32 × 2.5 cm; the plate is metal. Light-diffusing panel dimensions are 39.4 × 39.4 × 1 cm; material is synthetic. These component measurements help check the footprint, projection and necessary clearance.
The fitting is intended for fixed installation and has no attached power cable with plug.
Nominal supply is 230 V; the manual specifies 220–240 V AC, 50 Hz. IP20 is intended for dry indoor use and provides no protection against water. Electrical protection class II means double or reinforced insulation. The package contains 1 fitting, the LED light source, LED driver and assembly accessories. The fitting carries a 3-year warranty.
