BISKIT bathroom ceiling light with microwave motion sensor, integrated LED, 12 W, 700 lm, 2700 K, black (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source Integrated LED module; not a user-replaceable bulb
- Number of bulbs 1 integrated LED source
- Max. power 1 × 12 W
- Voltage 220–240 V AC, 50 Hz
- Housing colour Black / Opal
- Housing material Acrylic diffuser; metal mounting plate
- Light direction Diffuse light around the fitting
- Adjustable light direction Not adjustable
- Dimensions (L×W×H) 230 × 230 × 65 mm
- Mounting type Surface ceiling mounting
- Height adjustable No
- IP rating IP44
- Protection class (electrical) Class I
- Lamp has a switch No built-in manual switch; external circuit control
- Control method Microwave motion sensor; power supplied through the lighting circuit
- Dimming method Not dimmable; do not connect to an external dimmer
- Driver included Yes — LED driver
- Weight 460 g
- Warranty 3 years
- Luminous flux 1 × 700 lm
- Colour temperature (CCT) 2700 K
- Light colour Warm white: 2700 K
- Beam angle 128°
- Colour rendering index (CRI/Ra) 80
- Mains frequency 50 Hz
- Dimmable No
- Energy class G
- Rated Lifetime (hours) 20000 h
- Switching cycles 10000
- Full product code 79111/24/30
- EAN 5411212792136
- Output power 1 × 12 W
- Socket Integrated LED module; no replaceable bulb socket
- Included Yes — integrated LED source(s)
- Sensor type Microwave motion sensor
- Reach 3–4 m
- Detection angle 150°
- Time setting 5–1800 s
- Twilight setting Manufacturer does not provide an unambiguous threshold in lux
Product Description
Lucide BISKIT is a round flush ceiling light with an opal diffusing cover and a restrained rim. It suits general lighting in a bathroom or another damp indoor space, subject to the installation position’s requirements. The shallow profile preserves ceiling clearance, while the motion sensor provides automatic lighting when needed. Choose its size and output in relation to the room and any other light sources. The principal material is acrylic. This version is black with a matt finish. The opal diffusing surface creates a more even visible luminous area. The surface is spray-painted.
Integrated LED lighting is included, with 1 light source. The manufacturer’s stated source power is 1 × 12 W, with an output of 1 × 700 lm. The source has a stated beam angle of 128°. The broad distribution helps light the area around or beside the fitting, depending on its position. Watts describe electrical power, while lumens describe emitted light. CRI 80 describes colour rendering, helping compare how wall finishes, furniture and textiles appear under the light.
The light is warm white at a fixed 2700 K colour temperature, suitable for a relaxed atmosphere; there is no separate light-colour selection. The fitting is not dimmable. A microwave motion sensor provides automatic switch-on. The manufacturer specifies a detection distance of 3–4 m, a detection angle of 150° and a time setting of 5–1800 s. Distance and angle describe the covered area; the time setting describes the lighting hold time after movement. Configure the sensor for the room and intended detection area. Switching can also depend on ambient illumination; the precise light threshold is not unambiguously specified in the available data. The wall switch enables or disconnects power to the fitting.
Overall dimensions are 23 × 23 × 6.5 cm (length × width × height). The diameter is 23 cm. Height is not adjustable. The net weight is 0.46 kg. These dimensions help assess projection from the mounting surface and clearance around the fitting; account for its weight when selecting fixings for the surface.
The ceiling plate measures 23 × 23 × 2.5 cm. The mounting plate is metal. Component dimensions help compare the base with the intended position and assess whether the plate covers an existing connection.
The manufacturer’s stated LED source lifetime is 20000 h, describing accumulated operating time. A separate rating of 10000 switching cycles describes the number of on/off operations. The source has energy efficiency class G on the A–G scale. Integrated LED lighting means that a separate screw-in or plug-in bulb is not required.
Designed for a 220–240 V ~ 50 Hz mains supply; the nominal voltage is 230 V. No power cable is attached. Connect the fitting at its mounting position using the supplied driver. IP44 protects against solid objects larger than 1 mm and splashing water. Choose a bathroom mounting position that meets the particular zone’s requirements; the protection rating does not permit immersion. Electrical protection class I requires protective earthing.
The package contains 1 fitting, integrated LED lighting, driver and installation or assembly materials. The warranty period is 3 years.
