CINTRA pendant light LED 3x4.7 W 2700 K Ø25 cm transparent (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source Integrated LED module; not a user-replaceable bulb
- Number of bulbs 3 integrated LED sources
- Max. power 3 × 4.7 W = 14.1 W (source total)
- Voltage 220–240 V AC, 50 Hz
- Housing colour Transparent / Matt Gold / Brass
- Housing material acrylic; mounting plate: steel
- Light direction Diffuse light around the fitting
- Adjustable light direction Fixed light direction
- Dimensions (L×W×H) Maximum overall: 250 × 250 × 1500 mm; round canopy: Ø250 × 35 mm
- Mounting type Suspended ceiling mounting
- Height adjustable Yes — pendant cable length can be set after installation
- Height adjustment range 50 cm–150 cm
- IP rating IP20
- Protection class (electrical) Class I
- Protection class Class I
- Cable length 133 cm
- Lamp has a switch No built-in manual switch
- Control method External wall switch (not included)
- Dimming method Compatible external LED dimmer (not included)
- Driver included Yes — LED driver
- Weight 3200 g
- Warranty 3 years
- Wattage 3 × 4.7 W = 14.1 W (source total)
- Luminous flux 3 × 28–283 lm; maximum source sum 849 lm
- Colour temperature (CCT) 2700 K
- Light colour Warm white: 2700 K
- Beam angle 360°
- Colour rendering index (CRI/Ra) 85
- Voltage 220–240 V AC, 50 Hz
- Mains frequency 50 Hz
- Dimmable Yes — with compatible external dimmer
- Energy class G
- Rated Lifetime (hours) 30000 h
- Switching cycles Not specified by the manufacturer in current exact-variant sources
- Full product code 13499/13/60
- SKU 13499/13/60
- EAN 5411212134394
- Socket Integrated LED module; no replaceable bulb socket
- Included Yes — integrated LED sources
- Type Integrated LED
- Sensor type No motion sensor
Product Description
Lucide CINTRA is a decorative pendant with transparent ribbed acrylic shades and metal details in matt gold or brass tone. The glossy textured surface recalls cut crystal, while the shades themselves are acrylic. A steel ceiling canopy completes the retro character. The shades hang beneath a circular canopy; different suspension heights allow a staggered composition above a small table or seating area.
The fitting includes 3 integrated LED sources, each rated at 4.7 W with a stated luminous flux of 283 lm. Their powers total 14.1 W and their outputs add up to 849 lm; this arithmetic sum is not a separate measurement of the complete fitting after the shades. The 2700 K warm white tone suits a relaxed living room or bedroom. CRI 85 describes colour rendering, helping furniture and textile colours remain recognisable. The manufacturer-stated 360° beam angle and clear shades provide decorative light around the pendants; these are not narrowly aimed spotlights.
The manual specifies a source-output range of 28–283 lm per source; the achievable minimum depends on dimmer compatibility. The fitting is dimmable with a compatible external LED dimmer, sold separately. An ordinary wall switch provides on/off operation; brightness adjustment requires a control compatible with the driver. The colour temperature is fixed, and there is no motion sensor. The LED sources are built in, so separate bulbs are not required.
Overall dimensions at maximum height are Ø25 × 150 cm. Suspension height can be adjusted within 50–150 cm; the manufacturer allows height adjustment after installation. The canopy measures Ø25 × 3.5 cm, each acrylic shade measures Ø11 × 9.8 cm, and net weight is 3.2 kg. The inner mounting section of the canopy is shown as Ø20 cm in the drawing. When positioning the light over furniture, allow clearance below the shades and maintain comfortable sight lines across the surface.
The suspension cables are 133 cm long, with Teflon listed as their covering. The fitting connects permanently to a 220–240 V, 50 Hz mains supply. LED sources, driver and installation materials are included. IP20 is intended for dry indoor use, while electrical class I requires a protective-earth connection. Follow the installation instructions and disconnect power before mounting or adjusting the suspension.
Each LED source has a manufacturer-rated expected lifetime of 30,000 h and energy efficiency class G. The fitting has a 3-year warranty; expected LED operating life is a separate technical rating.
