XIO Wall light square LED dimmable G9 1x4W 2700K White (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type G9 replaceable LED bulb
- Replaceable light source Yes — replaceable G9 bulb
- Number of bulbs 1
- Max. power Included bulb: 1 × 4 W; separate maximum socket load not unambiguously confirmed
- Voltage 220–240 V AC, 50 Hz
- Housing colour White
- Housing material Aluminium
- Light direction Upward and downward
- Adjustable light direction Fixed body; upper and lower beams shaped with adjustable shutters
- Dimensions (L×W×H) 97 × 97 × 97 mm
- Mounting type Wall mounting
- Height adjustable No
- IP rating IP20
- Protection class (electrical) Class I
- Lamp has a switch No built-in switch; external wall control
- Control method External wall switch or compatible dimmer (not included)
- Dimming method Compatible external LED dimmer (not included)
- Weight 550 g
- Warranty 2 Years
- Luminous flux 1 × 350 lm
- Colour temperature (CCT) 2700 K
- Light colour Warm white: 2700 K
- Beam angle 360° (included G9 bulb; fixture beam separately adjustable)
- Colour rendering index (CRI/Ra) 80
- Voltage 220–240 V AC, 50 Hz
- Mains frequency 50 Hz
- Dimmable Yes — with compatible external dimmer
- Energy class F
- Rated Lifetime (hours) 15000 h
- Switching cycles 10000
- Full product code 09217/04/31
- EAN 5411212091895
- Output power 1 × 4 W
- Socket G9
- Included Yes — replaceable G9 LED bulb
- Type LED
Product Description
Lucide XIO is a wall light with a compact cube-shaped body and light openings above and below. It suits decorative lighting in a hallway, bedroom or living area. The light highlights the wall surface and texture, while the adjustable pattern changes the atmosphere created by the fitting. Several lights can be arranged along a wall, allowing spacing to suit the selected beam widths. The body is made of aluminium. This version is white. The surface is matt. The finish is powder-coated.
Included is 1 replaceable LED bulb with a G9 base. For this variant the manufacturer specifies 4 W power and 350 lm light-source output. Watts describe electrical power and lumens describe emitted light. This output applies to the bulb; the amount reaching the wall through the body openings and shutters also depends on the chosen beam setting. CRI 80 describes colour rendering, helping compare the appearance of wall finishes, furniture and textiles. The bulb’s beam angle is 360°; the fitting channels this light upwards and downwards. It is not the adjustment angle of the fitting. The manufacturer’s recommended replacement bulb is 49095/03/31.
The included source provides warm-white light at a fixed 2700 K colour temperature, suitable for relaxing areas and an evening atmosphere. Adjust brightness with a compatible external LED dimmer, not included. Dimming changes intensity rather than light colour; there is no separate CCT selection. A standard wall switch provides on/off control. The body is fixed and its height is not adjustable. Adjustable light shutters change the openings for the upper and lower light beams. Create narrower or wider patterns on the wall; this mechanical shaping of the light works independently of electrical dimming. The beams can be similar in both directions, different in width above and below, or one opening can be closed. This helps adapt the pattern to the wall height and nearby objects.
Overall dimensions are 9.7 × 9.7 × 9.7 cm. The net weight is 0.55 kg. These dimensions and weight describe the fitting itself. They help assess wall projection, available space and the suitability of the fixing for the wall construction.
The wall mounting plate measures 1 × 9.7 × 9.7 cm. The plate material is aluminium. Before installation, compare the plate with the electrical outlet and existing holes; the body’s outside dimensions alone do not confirm coverage of the connection point.
The included source has a stated lifetime of 15000 h, describing its accumulated operating time. A separate rating of 10000 switching cycles describes the number of on/off operations. The source has energy efficiency class F on the A–G scale. The bulb can be replaced while retaining the body; a different bulb will have its own lighting and dimming characteristics.
The fitting is designed for fixed connection to a 220–240 V ~ 50 Hz mains supply; its nominal voltage is 230 V. IP20 denotes dry indoor use without protection against water. Electrical protection class I requires protective earthing. No power cable is attached. Make the connection at the mounting position according to the manufacturer’s diagram. There is no automatic motion sensor; use the room switch or a compatible dimmer to control the light.
The package contains 1 fitting and installation materials. The warranty period is 2 years.
