HUPS IR outdoor wall light LED 10W 3000K IP54 motion sensor black (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Number of bulbs 1
- Housing colour Black / Opal
- Housing material Synthetic
- Light direction Diffuse light
- Adjustable light direction Fixed
- Dimensions (L×W×H) 210 × 49 × 210 mm
- Mounting type wall mounting
- Height adjustable Not height-adjustable
- IP rating IP54
- Protection class (electrical) II
- Control method Wall switch
- Weight 0.4 kg
- Warranty 3 years
- Wattage 1 × 10 W
- Luminous flux 1 × 950 lm
- Colour temperature (CCT) 3000 K
- Light colour Warm white
- Colour capability Fixed white light
- Beam angle 120 °
- Colour rendering index (CRI/Ra) 80
- Dimmable No (manufacturer specification)
- Energy class F
- Rated Lifetime (hours) 25000 h
- Switching cycles 12500
- Full product code 22863/10/30
- SKU 22863/10/30
- EAN 5411212221575
- Socket Integrated LED
- Included Yes
- Sensor type PIR motion sensor and day/night sensor
- Reach 0.10–9.00 m
- Detection angle 140 °
- Light source 1 × Integrated LED; included
- Voltage 230 V
Product Description
Lucide HUPS IR is a round, black outdoor wall light with an opal light surface. Its matt synthetic body and matching synthetic wall plate form a simple shallow profile beside an entrance, terrace or side wall. The opal section diffuses the light to create a softer-looking accent in the surrounding area. Its position and light direction have no mechanical adjustment.
One integrated 10 W LED source delivers 950 lm at a fixed 3000 K warm white colour temperature. The specified beam angle is 120°, with CRI 80 colour rendering. Light spreads around the fitting through the opal surface, and a separate bulb is not required. This model is non-dimmable and has no adjustable colour temperature. Watts describe power consumption, while lumens describe emitted light output, so compare lumens when assessing brightness. CRI describes how naturally object colours appear under the light.
A built-in PIR motion sensor allows the light to respond to movement; the manufacturer’s product description also mentions day/night operation. The exact product page specifies a 0.1–9 m detection distance and a 140° detection angle. Position and direction of approach affect practical detection, so plan the fitting around the route to be illuminated.
The fitting uses a 220–240 V, 50 Hz supply, which can be switched with a wall switch. Power must remain on for automatic sensing. Lucide specifies electrical protection class II. No separate supply lead with plug is attached, so position the light at a prepared electrical connection. Class II means double or reinforced electrical insulation.
Body and listed wall-plate dimensions are 21 × 4.9 × 21 cm, with a 21 cm diameter. Net weight is 0.4 kg. IP54 protection supports outdoor use with protection against dust ingress and splashing water. The package contains one fitting with LED source, driver and installation materials.
The LED source has energy efficiency class F, a specified service life of 25,000 hours and 12,500 switching cycles. The fitting has a 3-year warranty. The A–G scale compares light-source energy efficiency. Hours describe expected operating duration; cycles describe the number of on/off operations.
