Steinel
STEINEL XLED PRO 240 outdoor LED floodlight without sensor, 19.3 W, 2124 lm, 3000 K, IP44, white — 068103
156.00€Bez PVN: 128.93€
STEINEL XLED PRO 240 outdoor LED floodlight without sensor, 19.3 W, 2124 lm, 3000 K, IP44, anthracite — 068080
169.00€
Ex Tax: 139.67€
Enerģijas klase:
Viewed 7002 times
Categories
Cart
Account
Search
Recent View
Go to Top
All Categories
×
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Item specifics
- Light source type Integrated STEINEL LED system
- Replaceable light source No — the integrated LED light source cannot be replaced
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour Anthracite
- Housing material HCMC — high-conductivity magnesium composite
- Adjustable light direction Manual swivelling and tilting of LED panel
- Diffuser material Opal plastic
- Dimensions (L×W×H) 161 × 180 × 199 mm (depth × width × height)
- Mounting type Wall; outside corner with separately purchased bracket 053086; surface-mounted or concealed supply cable
- Adjustable head Yes — the LED panel can be swivelled and tilted
- Rotation angle (°) LED panel 180° horizontally
- Tilt angle (°) LED panel 180° vertically
- IP rating IP44
- IK rating IK03
- Protection class (electrical) Class II — double or reinforced insulation
- Operating temperature (Ta) −20…+40 °C
- Control method External switch or the sensor-switched L′ output of an XLED PRO 240 S (wired master/slave connection); no Bluetooth
- Dimming method Not dimmable; an external dimmer must not be used
- Basic light No basic-light mode
- Soft light start No — no soft light start
- Driver included Yes — integrated LED control gear
- Replaceable driver No — the integrated LED control gear cannot be replaced
- Weight 640 g — net weight on manufacturer page for this article
- Warranty Manufacturer-specified warranty: 5 years, subject to STEINEL warranty terms
- Accessories Luminaire with LED and control gear, wall mount and installation materials; corner bracket 053086 purchased separately
- Wattage 19.3 W — total luminaire input at full light output
- Luminous flux 2124 lm — total luminaire light output
- Luminous efficacy (lm/W) 110 lm/W — complete luminaire
- Colour temperature (CCT) 3000 K — warm white
- Colour rendering index (CRI/Ra) CRI / Ra 82
- Colour consistency (SDCM) SDCM 3
- Power factor (PF) 0.74 — according to manufacturer instructions
- Dimmable No
- Energy class E — integrated light-source class
- Energy consumption (kWh/1000 h) 20 kWh/1000 h — light-source energy-label value
- Rated Lifetime (hours) L70B50 >60,000 h at 25°C
- SKU 068080
- EAN 4007841068080
- Included Yes — integrated STEINEL LED light source
- Sensor type None — this version has no motion or twilight sensor
Product Description
The STEINEL XLED PRO 240 is an outdoor LED floodlight without a sensor for areas around homes or business premises. It combines 19.3 W input, 2124 lm output and warm white 3000 K light with an adjustable LED panel and opal diffuser. Housing colour: anthracite; manufacturer article number: 068080.
Lighting for entrances, courtyards and driveways
- 2124 lm light output with 19.3 W input and an efficacy of 110 lm/W describe the performance of the complete fitting. It is suitable for areas around a home as well as commercial entrances and courtyards.
- The LED panel swivels through 180° horizontally and tilts through 180° vertically. This allows the light to be directed towards the required area. These angles describe panel adjustment, not the light beam angle.
- Warm white 3000 K light and an opal diffuser provide even illumination. CRI 82 describes colour rendering, while SDCM 3 indicates consistency of the LED light colour.
- The HCMC magnesium composite helps dissipate heat from the LED. The manufacturer also specifies UV-resistant plastic components.
Key technical specifications
| Wattage | 19.3 W — total luminaire input at full light output |
|---|---|
| Luminous flux | 2124 lm — total luminaire light output |
| Colour temperature (CCT) | 3000 K — warm white |
| Dimensions (L×W×H) | 161 × 180 × 199 mm (depth × width × height) |
| IP rating | IP44 |
| IK rating | IK03 |
| Warranty | Manufacturer-specified warranty: 5 years, subject to STEINEL warranty terms |
| Sensor type | None — this version has no motion or twilight sensor |
| Control method | External switch or the sensor-switched L′ output of an XLED PRO 240 S (wired master/slave connection); no Bluetooth |
Sensor-free version for manual or shared control
This XLED PRO 240 has no built-in motion or twilight sensor. It can be switched by an external switch or connected to the sensor-switched output of an XLED PRO 240 S using the manufacturer's master/slave wiring diagram. In such a group, the S version's sensor determines when the sensor-free light also switches on.
The fitting has a power input, not its own sensor-switched control output. It therefore does not send motion commands to other lights. Shared operation requires a cable connection, respecting the XLED PRO 240 S output rating and the manufacturer's limit of up to 10 floodlights from this series.
There is no Bluetooth, app control or internal sensor time/twilight adjustment. The light cannot be dimmed and has no basic-light or soft-start mode. The number 240 in this version's model name does not mean that it contains a 240° sensor.
Installation and supplied components
The fitting is designed for wall mounting outdoors and a 220–240 V, 50–60 Hz mains supply. It accepts a concealed or surface-mounted supply cable. IP44 provides protection against splashing water and solid objects of 1 mm or larger. IK03 describes housing impact resistance; electrical protection class II means double or reinforced insulation. The operating temperature range is −20…+40°C.
The LED light source and control gear are built in and included — no separate bulb is required. The package includes a wall mount and installation materials. Corner bracket 053086 is not included; it is purchased separately for mounting on an outside corner. A qualified professional should make the electrical connection according to the manufacturer wiring diagram.
Service life, energy consumption and warranty
The manufacturer specifies L70B50 >60,000 h at 25°C: under those conditions, at least half of the LEDs are expected to retain at least 70% of their initial light output after the stated operating period. This is an LED lifetime rating, separate from the warranty period.
The integrated light source has energy class E, with an energy-label value of 20 kWh per 1000 operating hours. The complete fitting draws 19.3 W at full output. Actual energy use depends on operating duration. The LED light source and control gear cannot be replaced. The manufacturer specifies a 5-year warranty subject to STEINEL warranty terms.
Dimensions and net weight follow the current STEINEL page and data sheet for this article. Some version-specific values in the shared series manual may differ.
Manufacturer documents
- Technical datasheet (DE)
- Manufacturer warranty terms for Germany/Austria (DE)
- Installation and operating instructions, including English
- Wiring diagrams (DE)
- Dimension drawing (DE)
- Drilling template — print at 100%
- Photometric data — EULUMDAT (LDT)
- Tender specification (DE)
- EU declaration of conformity
- Quick installation guide — XLED PRO 240 and 240 S series
- Light-source energy label
- Technical datasheet (EN)
- Wiring diagrams (EN)
- Dimension drawing (EN)
- Tender specification (EN)
- EPREL 1003001
Manufacturer XLED PRO 240 series video — includes sensor and non-sensor versions
