Steinel
STEINEL IS 2360-3 ECO surface-mounted ceiling motion detector, 360°, Ø24 m, IP54, white — 057770
86.50€Ex Tax: 71.49€
STEINEL IS 2360-3 ECO surface-mounted ceiling motion detector, 360°, Ø24 m, IP54, black — 081706
86.50€
Ex Tax: 71.49€
Viewed 5733 times
Collection and delivery time
Estimated sourcing to our Riga store: 2 - 3 business days.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
Categories
Cart
Account
Search
Recent View
Go to Top
All Categories
×
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Item specifics
- Number of detection zones 972 optical switching zones
- Sensor type Passive infrared (PIR) motion detector with ambient-light measurement
- Installation Surface mounting on a ceiling; indoors and outdoors
- Reach Tangential Ø24 m (452 m²); radial Ø6 m (28 m²)
- Detection angle 360°; vertical aperture angle 90°
- Optimal mounting height 2.8 m
- Maximum mounting height 6 m; manufacturer-specified range 2.5–6 m
- Time setting 5 s–15 min — switch-off delay after the last movement
- Twilight setting 2–1000 lx; adjustable, no Teach-in
- Sensor system Detection field limited with shrouds; no electronic or mechanical reach adjustment
- Sneak-by guard Yes — detection also directly below the sensor
- Segment masking Using the supplied shrouds
- Manual override 4 h; activated by switching a connected mains switch off/on twice rapidly as instructed
- Watt-o-matic No low-level background light function
- Output Sensor’s own power consumption: 0.56 W
- Relay load Resistive: 2000 W; low-voltage halogen: 1000 VA
- LED load (W) LED <2 W: 100 W; LED >2 W and <8 W: 250 W; LED >8 W: 500 W; up to 8 LED lamps; total capacitance ≤176 µF
- Parallel connection Up to 5 sensors; wired Master/Master connection according to the manufacturer’s diagram
- Output type Relay; switched mains live to the light, not a potential-free contact
- Interface & control Relay on/off control of one lighting circuit; no Bluetooth or app
- Settings Two potentiometers: light threshold and switch-off delay; no remote control
- Voltage 220–240 V AC, 50/60 Hz; live L and neutral N required
- Operating temperature −20…+50°C
- IP rating IP54
- Dimensions (W×H×D) Ø121 × 57 mm — overall dimensions
- Warranty 5-year manufacturer warranty, subject to STEINEL terms
- Colour / RAL Black; RAL 9005
- In the box 1 sensor, shrouds and mounting parts; ceiling mounting base
- Manufacturer SKU 081706
- EAN 4007841081706
Product Description
STEINEL IS 2360-3 ECO is a black surface-mounted ceiling motion detector for automatic lighting indoors and outdoors. Its 360° detection field covers up to Ø24 m when a person moves across the sensor field. Passive infrared technology responds to heat from moving bodies; the light sensor lets you set the ambient brightness at which the lighting may switch on. Article 081706, EAN 4007841081706.
Understanding the detection range
- Tangential reach up to Ø24 m (452 m²). This is the full detection diameter, equivalent to a radius of 12 m from the sensor.
- Direct approach: Ø6 m (28 m²). The direction of movement affects detection significantly.
- 972 optical switching zones and sneak-by protection cover the monitored area, including directly below the sensor. They are not separate lighting-control channels.
Coverage is 360° horizontally, with a vertical aperture angle of 90°. Supplied shrouds mask unwanted areas such as a neighbouring path or road. There is no electronic or mechanical reach adjustment. PIR cannot detect through walls or glass and is not intended to detect a completely motionless person. Maximum coverage must not be assumed at every mounting height.
Mounting and housing
The mounting base attaches to the ceiling surface; overall dimensions are Ø121 × 57 mm. Suitable locations include canopies, carports, entrances and passageways requiring wide detection coverage. The optimum mounting height is 2.8 m; the manufacturer’s current specifications give a 2.5–6 m range.
The housing is UV-resistant plastic. Net weight: 177 g. IP54 means protection against harmful dust ingress and splashing water; follow the manufacturer’s mounting and cable-sealing requirements. Operating temperature: −20…+50°C. Electrical protection class II means double insulation. Keep the sensor’s view clear; nearby heat sources or moving branches may cause unwanted triggering.
Relay and switching loads
The detector switches one lighting circuit on and off. It requires live L and neutral N; the output supplies switched mains live to the light. It is not a potential-free control contact. Supply: 220–240 V AC, 50/60 Hz.
| Resistive load | 2000 W |
|---|---|
| Low-voltage halogen lamps | 1000 VA |
| LED lamps <2 W | 100 W |
| LED lamps >2 W and <8 W | 250 W |
| LED lamps >8 W | 500 W |
| Number of LED lamps | Up to 8 |
| Fluorescent lamps with electronic ballast | 500 W |
| Fluorescent lamps, series-corrected | 900 VA |
| Fluorescent lamps, parallel-corrected | 400 VA |
| Total capacitive load | 176 µF |
| Sensor’s own power consumption | 0.56 W |
Each LED power limit is the combined load for that lamp category. Lamp-count, capacitance and driver inrush-current limits also apply. Do not use the resistive rating as an LED rating. This table uses the current STEINEL data sheet for this exact article.
Settings and everyday control
- 5 s–15 min: the light switches off after the selected delay from the last detected movement. Further movement restarts the timer.
- 2–1000 lx: a potentiometer sets the ambient-light threshold. There is no Teach-in function.
- No app required: both settings are on the detector. Bluetooth and remote controls are not supported.
- On/off switching: no dimming, background-light or constant-light control.
Four-hour manual override: rapidly switch a correctly connected mains switch off and on twice, following the interval in the instructions. Sensor operation resumes after four hours; the instructions also explain how to restore it earlier.
Wired Master/Master interconnection is supported for up to five detectors. This is not a wireless network and does not increase the permitted load on an individual output.
Supplied items, warranty and documents
Supplied with one detector, shrouds and mounting parts including a ceiling mounting base. The controlled light and external switch are sold separately. Manufacturer warranty: 5 years, subject to STEINEL terms.
A qualified installer must complete mains wiring in accordance with the manufacturer’s instructions. Manufacturer: STEINEL GmbH, Dieselstraße 80–84, 33442 Herzebrock-Clarholz, Germany; product@steinel.de. The main photo shows the selected article; shared application and UV-resistance illustrations may show a different housing colour.