STEINEL RS PRO P1 LED wall/ceiling light without sensor, 8.3 W, 953 lm, 3000 K, IP54, white — 056056
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source No
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour White
- Housing material Plastic
- Diffuser material Opal PMMA
- Dimensions (L×W×H) 280 × 280 × 110 mm (Ø280 mm)
- Mounting type Surface-mounted; indoor wall or ceiling; ceiling requires concealed rear cable entry
- IP rating IP54
- IK rating IK03
- Protection class (electrical) II
- Operating temperature (Ta) −10…+40 °C
- Control method External switch or wired connection to sensor version; no integrated sensor
- Soft light start Yes
- Replaceable driver No
- Weight 370 g
- Warranty 5 years
- Wattage 8.3 W
- Luminous flux 953 lm
- Luminous efficacy (lm/W) 116 lm/W
- Colour temperature (CCT) 3000 K; fixed
- Colour rendering index (CRI/Ra) 82
- Colour consistency (SDCM) 3
- Power factor (PF) 0.91
- Dimmable No
- Energy class D (light source LS-0099)
- Energy consumption (kWh/1000 h) 9 kWh/1000 h
- Rated Lifetime (hours) IEC 62717: L70 — 100,000 h; L80 — 73,000 h
- Photobiological risk group RG1
- SKU 056056
- EAN 4007841056056
Product Description
STEINEL RS PRO P1 is a round LED wall and ceiling light with a white housing and a domed opal PMMA cover. Its simple shape suits both new and refurbished interiors, while the cover conceals the individual LED points. The 8.3 W LED system provides 953 lm at 3000 K. The warm white light creates a welcoming atmosphere in residential corridors, stair landings and guest areas.
Straightforward everyday control
This is the version without an integrated motion sensor. An ordinary external wall switch can turn the light on and off, keeping it illuminated for as long as required. Soft light start makes the transition from darkness more comfortable; main-light brightness is not adjustable. It suits interiors where lighting control is already provided by the building's electrical installation.
A coordinated appearance along the route
The RS PRO P1 can operate independently or be connected by cable to the sensor version. In that arrangement, the lead sensor light determines movement detection and switching. This makes it possible to add lighting at further points along a corridor or stairwell while retaining a consistent P-series appearance. The opal cover creates a broad luminous surface that fits naturally into simply finished shared interiors.
Wall or ceiling installation
The fitting is intended for surface mounting indoors, with IP54 protection for practical shared spaces. Ceiling installation requires a concealed cable entering from behind; it is not suitable for ceiling mounting with a surface-routed supply cable. Its 280 mm diameter and 110 mm projection help when planning a position in a narrower circulation area. The integrated LED source and driver are not replaceable. Article 056056 carries a five-year manufacturer's warranty.
- An ordinary wall switch gives control over how long the light remains on.
- A wired connection to the sensor version can illuminate several points together.
- The opal cover provides a calm, consistent visual presence.
- A shared P-series design helps coordinate wall and ceiling lighting.
