STEINEL XLED home 2 outdoor LED floodlight without sensor, 13.7 W, 1550 lm, 3000 K, IP44, anthracite — 033095
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated STEINEL LED system
- Replaceable light source No — integrated LED light source cannot be replaced
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour Anthracite
- Housing material HCMC — high-conductivity magnesium composite
- Adjustable light direction Manual swivelling and tilting of LED panel
- Diffuser material Opal plastic
- Dimensions (L×W×H) 161 × 180 × 181 mm (depth × width × height)
- Mounting type Wall; outside corner with separately purchased bracket 053086
- Adjustable head Yes — adjustable LED panel
- Rotation angle (°) LED panel 180° horizontally
- Tilt angle (°) LED panel 180° vertically
- IP rating IP44
- IK rating IK03
- Protection class (electrical) Class II — double or reinforced insulation
- Operating temperature (Ta) −20…+40 °C
- Control method External switch or suitably rated external sensor relay; no Bluetooth
- Dimming method Not dimmable; no external dimmer
- Driver included Yes — integrated LED control gear
- Replaceable driver No — integrated LED control gear cannot be replaced
- Weight 483 g — manufacturer net weight
- Warranty Manufacturer-specified warranty: 5 years, subject to manufacturer warranty terms
- Accessories Luminaire with LED and wall mount, mounting materials and instructions; corner bracket not included
- Wattage 13.7 W — total luminaire input at full output
- Luminous flux 1550 lm — complete luminaire
- Luminous efficacy (lm/W) 113 lm/W — complete luminaire
- Colour temperature (CCT) 3000 K — warm white
- Colour rendering index (CRI/Ra) CRI / Ra 82
- Colour consistency (SDCM) SDCM 3
- Power factor (PF) 0.74 — according to manufacturer instructions
- Dimmable No
- Energy class E — integrated light-source class
- Energy consumption (kWh/1000 h) 14 kWh/1000 h — light-source energy label
- Rated Lifetime (hours) 50,000 h at maximum ambient temperature; L70B50 >60,000 h at 25°C; LM80 rating L70B10
- SKU 033095
- EAN 4007841033095
- Included Yes — integrated STEINEL LED light source
- Sensor type None — this version has no motion or twilight sensor
Product Description
The STEINEL XLED home 2 is an outdoor LED floodlight without a sensor for courtyards, driveways, patios and entrances. Its integrated 13.7 W LED module delivers 1550 lm of warm white light at 3000 K. Housing colour: anthracite; manufacturer article number: 033095.
Adjustable lighting around the home
- The LED panel swivels through 180° horizontally and 180° vertically to direct light towards an entrance, driveway or patio.
- Warm white 3000 K light and an opal diffuser provide even light distribution. CRI 82 describes colour rendering, while SDCM 3 indicates consistency of the LED light colour.
- The HCMC magnesium composite helps dissipate heat from the LED module. IK03 is the housing's mechanical impact-resistance rating.
Key technical specifications
| Wattage | 13.7 W — total luminaire input at full output |
|---|---|
| Luminous flux | 1550 lm — complete luminaire |
| Colour temperature (CCT) | 3000 K — warm white |
| Dimensions (L×W×H) | 161 × 180 × 181 mm (depth × width × height) |
| IP rating | IP44 |
| IK rating | IK03 |
| Warranty | Manufacturer-specified warranty: 5 years, subject to manufacturer warranty terms |
| Sensor type | None — this version has no motion or twilight sensor |
| Control method | External switch or suitably rated external sensor relay; no Bluetooth |
Sensor-free version for external switching
This XLED home 2 has no built-in motion or twilight sensor. It is switched on and off by an external switch or a suitably rated external sensor relay. It suits installations with existing lighting controls or where manual switching is preferred.
Several lights can share one externally switched supply circuit, subject to the switch or relay's permitted LED load. The fitting has no Bluetooth, internal sensor time/twilight settings or dimming. Wired linking here means an externally controlled electrical connection; it does not itself provide Bluetooth or sensor-signal communication.
Installation and supplied components
The floodlight is designed for mounting on an outside wall and a 220–240 V, 50–60 Hz mains supply. IP44 provides protection against splashing water and solid objects of 1 mm or larger; electrical protection class II means double or reinforced insulation. The specified ambient temperature range is −20…+40°C.
The LED light source and control gear are built in and included — no separate bulb is required. A wall mount and installation materials are supplied. For mounting on an outside corner, matching bracket 053086 is available separately.
Service life, energy consumption and warranty
The manufacturer specifies 50,000 hours of LED life at the maximum ambient temperature. The instructions separately state L70B50 >60,000 h at 25°C: under those conditions, at least half of the LEDs are expected to retain at least 70% of their initial light output at the stated lifetime. The lifetime rating is separate from the warranty period.
The integrated light source has energy class E and a label value of 14 kWh per 1000 operating hours. Actual consumption depends on operating duration. The LED light source and control gear cannot be replaced. The manufacturer specifies a 5-year warranty subject to STEINEL warranty terms.
Manufacturer documents
- Technical datasheet (DE)
- Manufacturer warranty terms for Germany/Austria (DE)
- Installation and operating instructions, including English
- Wiring diagram (DE)
- Dimension drawing (DE)
- Drilling template — print at 100%
- Photometric data — EULUMDAT (LDT)
- Tender specification (DE)
- EU declaration of conformity
- Quick installation guide
- Light-source energy label
- Technical datasheet (EN)
- Wiring diagram (EN)
- Dimension drawing (EN)
- Tender specification (EN)
- EPREL 1002978
Manufacturer XLED home 2 series video — functions shown vary by version
