STEINEL XLED Protect LED floodlight, without sensor, 13.6 W, 1642 lm, 3000 K, IP54, white — 090005
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED module
- Replaceable light source No — integrated LED cannot be replaced
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour White
- Light direction Forward and sideways; overall direction set by head position
- Adjustable light direction Manual head rotation and tilt
- Diffuser material Opal plastic
- Dimensions (L×W×H) 195 × 195 × 174 mm (depth × width × height)
- Mounting type Outdoor wall; building corner with a separately purchased bracket
- Adjustable head Yes — swivelling, tilting and lockable head
- Rotation angle (°) 180° horizontally — floodlight head
- Tilt angle (°) 180° vertically — floodlight head
- IP rating IP54
- IK rating IK03
- Protection class (electrical) Class II — double insulation
- Operating temperature (Ta) −20…+40 °C
- Control method External switch or suitable switched mains supply; no sensor
- Dimming method Not suitable for an external dimmer
- Remote control included No remote control included
- Light distribution Broad panoramic light from three emitting surfaces
- Replaceable driver No — control gear cannot be replaced
- Weight 525 g — manufacturer net weight
- Warranty 5 years — manufacturer warranty subject to its terms
- Accessories Luminaire with LED, wall bracket, installation accessories, instructions; corner bracket separate
- Wattage 13.6 W — total luminaire input at full output
- Luminous flux 1642 lm — complete luminaire
- Luminous efficacy (lm/W) 121 lm/W — complete luminaire
- Colour temperature (CCT) 3000 K — warm white
- Colour rendering index (CRI/Ra) CRI / Ra 82; R9 18
- Colour consistency (SDCM) SDCM 3 — initial colour consistency (per manual)
- Power factor (PF) 0.8 — per manual
- Dimmable No
- Energy class E — light-source energy label
- Energy consumption (kWh/1000 h) 15 kWh/1000 h — manufacturer energy label, EPREL 2104642
- Rated Lifetime (hours) >60,000 h, L70B50 at 25°C
- SKU 090005
- EAN 4007841090005
- Included Yes — LED already integrated; no separate bulb required
- Type LED
Product Description
STEINEL XLED Protect in white is an adjustable outdoor LED floodlight with three light-emitting surfaces. Its front and side lighting creates a broad panoramic spread for an entrance, courtyard, driveway or terrace. This version has no motion sensor. Switch the light on and off with an external switch or a suitable switched mains supply.
Broad lighting with an adjustable direction
The fitting delivers 1642 lm of 3000 K warm white light. Lumens describe the total light output, while the warm tone suits the surroundings of a home. Total luminaire input at full output is 13.6 W. The head swivels 180° horizontally and tilts 180° vertically and can be locked in the chosen position. Side light surfaces help illuminate the areas beside the fitting.
The CRI / Ra 82 colour-rendering index describes how object colours appear; STEINEL also specifies R9 18 for red colour rendering. Complete-product efficacy is 121 lm/W. The manual specifies SDCM 3 for initial light colour consistency. Declared LED life is over 60,000 hours, L70B50 at 25°C. This describes lumen maintenance under stated test conditions, rather than a warranty period.
A sensor-free version for external switching
This XLED Protect has no motion sensor or automatic dusk-to-dawn controller. It lights when mains power is supplied and goes out when power is switched off. Automatic operation requires a separate external controller with a suitable load rating, checked by the installer. The fitting has no group controller, Bluetooth, timer or twilight dials of its own.
Integrated LED lighting is included
The LED light source is already built in and included. No separate bulb is needed. Neither the light source nor its control gear is intended for replacement. The light is not dimmable and is not designed for an external dimmer. The manufacturer energy label declares class E and 15 kWh/1000 h, registered as EPREL 2104642. The rounded label consumption is a different figure from the precise luminaire input power in watts.
Outdoor wall installation
IP54 provides protection against harmful dust ingress and splashing water. IK03 identifies the tested mechanical impact-resistance level. An opal plastic diffuser spreads the light; the construction is intended for outdoor conditions and UV exposure. The operating ambient range is −20 to +40°C.
Mount the fitting on an outdoor wall in the position shown by STEINEL. Mounting on a building corner requires a compatible STEINEL corner bracket, purchased separately. Dimensions are 195 × 195 × 174 mm (depth × width × height) and the net weight is 525 g. Supply: 220–240 V AC, 50–60 Hz; electrical Class II. Double insulation means the fitting itself does not require a protective-earth connection. The manual requires at least 3 m clearance from Wi-Fi routers or access points. Have a qualified installer connect it according to the manufacturer wiring diagram.
Package contents and care
Included: luminaire with integrated LED, wall mounting bracket, installation accessories and instructions. A corner bracket is not included. Clean surfaces with a slightly damp cloth without detergents. STEINEL provides a 5-year manufacturer warranty subject to its terms.
Manufacturer documents and downloads
- Technical datasheet (EN, PDF)
- Installation and operating instructions (includes English) (PDF)
- Wiring diagram (EN, PDF)
- Dimension drawing (EN, PDF)
- Photometric file for lighting calculations (LDT)
- Tender specification (EN, DOCX)
- EU declaration of conformity (PDF)
- Quick start guide (PDF)
- Energy label (PDF)
- Technical datasheet (DE, PDF)
- Manufacturer warranty terms (DE) (PDF)
- Wiring diagram (DE, PDF)
- Dimension drawing (DE, PDF)
- Tender specification (DE, DOCX)
