AC/DC power supply, 200W, 12V DC, 16.5A, fanless (Optonica 6238)
The product is in stock up to the available quantity.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Power 200 W
- Input voltage (V) 198–242 V AC
- Input frequency (Hz) 50–60 Hz
- Output voltage (V) 12 V DC
- Outgoing current 16.5 A
- Output type Constant voltage
- Dimmable No
- Cooling method Passive, fanless
- IP rating IP20
- Connection type Quick terminals
- Dimensions (H×W×L) 28 × 53 × 212 mm
- Weight 430 g
- Warranty period 2 years
Product Description
AC/DC power supply, 200W, 12V DC, 16.5A, fanless (Optonica 6238)
A fanless AC/DC power supply that converts a 198–242V AC input into a constant 12V DC output. The maximum rated output is 16.5A and 200W, suitable for compatible 12V equipment when the connected load remains within these limits.
The model can power LED strips and luminaires, but it is not restricted to lighting. It may also be used with other 12V constant-voltage devices after checking voltage, polarity, continuous current and start-up current. The compact aluminium enclosure relies on passive cooling and therefore operates without fan noise.
The built-in pin switch selects a 100%, 80%, 60% or 40% output-power limit. The selector reduces the available maximum power and does not change the 12V output voltage. Quick-connect terminals support tidy wiring in protected IP20 indoor installations.
Key benefits
- Constant 12V DC output up to 16.5A and 200W
- Suitable for lighting and other compatible 12V DC loads
- Selectable 100%, 80%, 60% or 40% output-power limit
- Silent fanless operation
- Passive aluminium heat dissipation
- Quick-connect terminals for tidy wiring
Application and installation
For compatible 12V DC equipment whose continuous load and start-up current remain within the selected power limit. It can supply LED strips, luminaires, signs, displays and other constant-voltage devices. Check polarity, retain operating reserve, set the pin selector before switching on and provide ventilation around the housing.
Package contents and important information
Includes the AC/DC power supply. Installation cables and circuit protection are selected for the specific application. The pin selector changes the maximum available power, not the 12V output voltage. IP20 equipment must be installed in a protected dry indoor location with terminals inaccessible after installation.
Technical specifications
- Power: 200W
- Input voltage: AC 198–242V, 50–60Hz
- Output voltage: DC 12V
- Output current: 16.5A
- Output-power modes: 100% / 80% / 60% / 40% (pin switch)
- IP rating: IP20
- Housing material: Aluminium
- Cooling fan: No
- Dimensions (L×W×H): 212 × 53 × 28 mm
- Warranty: 2 years
