LED Power Supply 12V, 100W, 8.33A, IP67, 3 Years Warranty
The product is in stock up to the available quantity.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Power 100W
- Incoming current AC100-240V
- Output voltage (V) 12 V DC
- Outgoing current 12V DC
- Current (A) 8.33A
- IP rating IP67
- Dimensions (H×W×L) 220x52x32 mm
- Weight 630 g
- Warranty period 3 years
- IP rating IP67
Product Description
OPTONICA 6252 LED power supply is a 12V constant-voltage IP67 power supply for LED strips, LED modules and low-voltage lighting installations where protection against dust and moisture is required. With 100W output power and 8.33A current, it is suitable for higher-load 12V LED systems.
The IP67 housing makes this model a good choice for damp technical spaces, outdoor-protected installations, façade details, advertising lighting and LED strip systems installed in areas where a standard IP20 power supply would not be suitable. The connection points must still be installed correctly and protected according to the installation environment.
Recommended use
- 12V LED strips and LED modules
- Outdoor-protected or damp-area LED lighting
- Façade, signage and decorative architectural lighting
- Projects where a 3-year warranty and IP67 protection are required
Technical specification
- SKU: 6252
- EAN: 3800156662520
- Input voltage: AC100-240V
- Output voltage: 12V DC
- Power: 100W
- Output current: 8.33A
- Protection rating: IP67
- Dimensions: 220 x 52 x 32 mm
- Warranty: 3 years
For stable operation, calculate the LED load before installation and leave a reserve. For a 100W power supply, it is good practice not to use the full rated load continuously.
