ROGER DL-2LED6 recessed ground marker 1 W, horizontal light, IP66 (Kanlux 07281)
The product is in stock up to the available quantity.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source No
- Voltage 220–240 V AC, 50 Hz
- Housing colour Grey
- Housing material Steel, plastic and aluminium
- Dimensions (L×W×H) Ø100 × 74 mm
- Mounting type Ground-recessed
- IP rating IP66
- IK rating IK09
- Protection class (electrical) Class I
- Operating temperature (Ta) −20 to +35 °C
- Cable length 0.3 m
- Light distribution Horizontal
- Weight 270 g
- Wattage 1 W
- Colour temperature (CCT) 6000–6500 K
- Light colour Cool white
- Rated Lifetime (hours) 20,000 h
- Mounting type Ground-recessed
- Installation Ground / outdoor paving
- Recessed depth 74 mm
- Cut-out diameter 96 mm
- Accessories (included) Mounting box
- Visible trim Ø 100 mm
Product Description
Kanlux ROGER DL-2LED6 is a recessed outdoor marker that emits cool white light horizontally through the openings in its top plate. Rather than acting as a powerful uplight, it is intended to define routes, terrace edges and landscape boundaries with a low, directional guidance light.
Key benefits
- Integrated source: 1 W LED, 6000–6500 K, rated lifetime 20,000 hours.
- Outdoor durability: IP66 ingress protection and IK09 impact resistance.
- Installation data provided: Ø100 mm visible trim, approximately Ø96 mm cut-out and 74 mm recess depth.
- Load specification: published static pressure resistance of 5 kN for correctly supported installation.
Use and installation
Install the marker in a drained, structurally supported opening using the supplied mounting box. Keep the horizontal light outlets unobstructed and provide a safe mains connection protected from water ingress. The published 5 kN static-pressure value does not by itself confirm suitability for vehicle traffic.
Package and important information
The integrated 1 W LED and mounting box are included. The 0.3 m cable is part of the luminaire. Additional junction components and drainage materials must be selected for the actual installation environment.
Technical parameters
- Power: 1 W
- Light colour: 6000–6500 K, cool white
- Supply: 220–240 V AC, 50 Hz
- IP / IK: IP66 / IK09
- Visible diameter: Ø100 mm
- Cut-out diameter: Ø96 mm
- Recess depth: 74 mm
- Cable: 0.3 m
- Operating temperature: −20 to +35 °C
- Mounting box included: Yes