STEINEL Spot ONE S outdoor wall spotlight, motion sensor, 1× GU10, 512 lm, 3000 K, anthracite — 058616
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Replaceable GU10 LED bulb
- Replaceable light source Yes — GU10 LED bulb replaceable by the user
- Number of bulbs 1
- Max. power 1 × GU10 LED up to 9 W; not for halogen bulbs
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour Anthracite
- Housing material Aluminium
- Light direction Aim the light by swivelling and tilting the head
- Adjustable light direction Manual mechanical head adjustment
- Diffuser material Transparent plastic
- Dimensions (L×W×H) 175 × 97 × 98 mm (depth × width × height)
- Mounting type Outdoor wall; concealed or surface-routed cable using spacers
- Adjustable head Yes — one adjustable head
- Rotation angle (°) 180° horizontally
- Tilt angle (°) 90° vertically
- IP rating IP44
- IK rating IK03
- Protection class (electrical) Class I — protective earth (PE) required
- Operating temperature (Ta) −20…+40 °C
- Control method Motion/twilight sensor; time and twilight dials
- Dimming method Not suitable for an external dimmer
- Remote control included No remote control included
- Light distribution Directed 38° beam with supplied bulb
- Replaceable driver GU10 LED bulb is replaceable; separate control-gear replacement is not provided
- Weight 500 g — manufacturer net weight
- Warranty 3 years — manufacturer warranty subject to its terms
- Accessories Luminaire, 1 GU10 LED bulb, wall bracket, 3 screws, 3 wall plugs, 3 spacers, instructions
- Wattage 7.47 W — total luminaire input at full output
- Luminous flux 512 lm — complete luminaire
- Luminous efficacy (lm/W) 68.5 lm/W — complete luminaire
- Colour temperature (CCT) 3000 K — warm white
- Beam angle 38° — with supplied bulb
- Colour rendering index (CRI/Ra) CRI / Ra 81
- Colour consistency (SDCM) SDCM 5
- Dimmable No
- Energy class F — supplied replaceable GU10 bulb (LS-0003)
- Energy consumption (kWh/1000 h) 7 kWh/1000 h — supplied bulb energy label
- Rated Lifetime (hours) >20,000 h, L70B50 at 25°C
- SKU 058616
- EAN 4007841058616
- Output power 6.7 W — supplied GU10 LED bulb (per manual)
- Socket GU10
- Included Yes — 1 × replaceable 3000 K GU10 LED bulb
- Type LED
- Sensor type Passive infrared (PIR)
- Reach Up to 10 m across the zone; up to 2 m on direct approach
- Detection angle 90°
- Optimal mounting height 2 m
- Maximum mounting height 2.5 m
- Twilight setting 2–1000 lx; daylight mode available
- Sneak-by guard No dedicated detection zone directly beneath the sensor
- Segment masking No segment-masking facility specified by the manufacturer
- Watt-o-matic No basic or night-light mode
- Soft light start No
- Output 0.2 W — standby with light off
- Parallel connection Cable — up to 10 Spot lights of this type, following manufacturer diagram
- Interface & control Local controls; cable interconnection
- Settings 2 controls on fitting; factory 8 s and 1000 lx
- Time setting 8 s–35 min after last movement
Product Description
STEINEL Spot ONE S in anthracite is a compact outdoor wall spotlight with one adjustable head and a replaceable GU10 LED bulb. Its directed beam is suited to an entrance, façade, terrace or driveway. This S version switches on automatically when movement is detected; time and twilight settings are adjusted on the fitting.
Aim the light where it is needed
The head swivels 180° horizontally and tilts 90° vertically to illuminate a chosen part of the wall, entrance or path. The supplied bulb provides 3000 K warm white light with an approximately 38° beam. The transparent front rim adds a small light accent around the head.
The current manufacturer datasheet specifies 512 lm for the complete luminaire and 7.47 W total input power at full output. CRI 81 describes colour rendering; SDCM 5 describes initial colour consistency. The declared light-source life is more than 20,000 hours (L70B50 at 25°C).
A replaceable GU10 bulb is included
The package includes one 3000 K GU10 LED bulb. The manual specifies 6.7 W for that bulb; this is bulb power, while the 7.47 W figure above is the input of the complete luminaire. The user can replace the bulb by opening the front cover, so a failed bulb does not require replacing the entire fitting.
Use a GU10 LED replacement bulb rated up to 9 W. Halogen lamps and an external dimmer are not supported. This model also has no dimmed basic-light mode or soft start. The supplied bulb is energy class F, 7 kWh/1000 h (LS-0003, EPREL 715074); these energy-label figures describe the replaceable bulb.
90° motion detection for an entrance or path
The passive infrared (PIR) sensor responds to moving heat sources such as people and animals. It covers 90° with a reach of up to 10 m across the detection zone or up to 2 m when approaching the sensor directly. Position it across the normal walking direction for reliable detection. The recommended mounting height is 2 m, with a maximum of 2.5 m. The PIR sensor does not detect movement through glass or walls; keep its line of sight unobstructed.
Set time and twilight level on the fitting
Two controls set the ON time from 8 seconds to 35 minutes and the twilight threshold from 2 to 1000 lx. A lower lux threshold limits activation to darker surroundings. Daylight mode allows a functional test in bright conditions. Every detected movement restarts the timer; after switching off, the sensor pauses for approximately one second before it can trigger again.
Factory settings are 8 seconds and 1000 lx. Standby consumption with the light off is 0.2 W; this is separate from full-output luminaire power and is not an external load rating. The S version requires no phone for adjustment.
Wired interconnection for coordinated operation
The manufacturer permits up to 10 lights of this type in the specified Spot interconnection arrangement. A Spot ONE S can also control the Spot ONE version without a sensor. Wire the fittings according to the applicable manufacturer diagram; this is a cable connection, not Bluetooth, and does not establish a universal LED load rating.
Aluminium construction for outdoor wall mounting
An aluminium housing, IP44 and IK03 support outdoor use in the mounting position specified by STEINEL. IP44 provides protection against splashing water and solid foreign objects over 1 mm; IK03 identifies the tested impact-resistance level. The front cover is transparent plastic. The operating ambient range is −20 to +40°C.
Mount the fitting on a wall with the cable concealed behind it or routed over the surface using the supplied spacers. Dimensions are 175 × 97 × 98 mm (depth × width × height); the head diameter is 69 mm. Supply: 220–240 V, 50–60 Hz, electrical Class I with protective earth (PE). Have a qualified installer make the mains connection. Download the drilling-template PDF and print it at actual 100% size.
Package contents and care
Included: one luminaire, one GU10 LED bulb, wall bracket, 3 screws, 3 wall plugs, 3 spacers and instructions. A corner bracket is not included. The current manufacturer net weight is 500 g. Clean with a damp cloth without detergents; when replacing the bulb, keep the front-cover seal clean and undamaged. The fitting has a 3-year manufacturer warranty subject to its terms.
Note on manufacturer technical data
The shared Spot ONE/DUO manual also contains earlier photometric values, including 620 lm and SDCM 6. This product card uses the current manufacturer datasheet for EAN 4007841058616 for complete-product light output, input power and colour data: 512 lm, 7.47 W, CRI 81 and SDCM 5. The bulb is replaceable; a different GU10 LED bulb may change the output, colour temperature and beam angle.
Manufacturer documents and downloads
- Technical datasheet (EN, PDF)
- Installation and operating instructions (includes English) (PDF)
- Wiring diagrams (EN, PDF)
- Dimension drawing (EN, PDF)
- Tender specification (EN, DOCX)
- EU declaration of conformity (DE-FR, PDF)
- Energy label for the supplied LS-0003 GU10 bulb (PDF)
- Technical datasheet (DE, PDF)
- Wiring diagrams (DE, PDF)
- Dimension drawing (DE, PDF)
- Tender specification (DE, DOCX)
- Manufacturer warranty terms (DE, PDF)
- Drilling template — print PDF at 100% scale (PDF)
