Steinel
STEINEL IR 180 AP easy PIR sensor switch, 180°, up to 8 m, surface-mounted, IP54, grey — 066048
113.50€Ex Tax: 93.80€
STEINEL HF 360 AP surface-mounted HF motion sensor, 360°, 1–8 m, IP54, grey — 751210
76.25€
Ex Tax: 63.02€
Viewed 8492 times
Collection and delivery time
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
Categories
Cart
Account
Search
Recent View
Go to Top
All Categories
×
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Item specifics
- Protection class (electrical) II
- Sensor type High frequency (HF), 5.8 GHz; motion detector
- Installation Surface-mounted; wall; indoors
- Reach Adjustable1–8 m
- Detection angle 360°; aperture140°
- Time setting 10 s–30 min
- Twilight setting 2–2000 lx
- Manual override 4h; then automatic sensor operation
- Manual control Built-in button:4h override or permanentOFF; redLEDindicator
- Relay load Resistive up to1000W; fluorescent up to500W; subject to lamp/capacitance limits
- LED load (W) Min.20W total load; max.4 lamps; C≤88μF.1000W is not an LED rating.
- Parallel connection Yes;3-wire connectionL/L′/N
- Output type Switched mains phase L′
- Settings Controls behind front cover
- Voltage 230–240 V AC, 50 Hz
- IP rating IP54
- Dimensions (W×H×D) 82×72×64mm (H×W×D; older exact data sheet)
- Warranty 3years
- Colour / RAL Grey
- Manufacturer SKU 751210
- EAN 4007841751210
- Weight Approx.300g
Product Description
STEINEL HF 360 AP is a surface-mounted sensor switch for automatic indoor lighting. Its compact grey housing suits stairways, basement passages and utility rooms where light should turn on as someone enters. The built-in button also offers manual lighting, making the switch useful when a task keeps you in one place for longer.
Radar detection matched to the room
The 5.8 GHz high-frequency sensor detects movement through changes in the reflected signal. Detection does not depend on a temperature difference between a person's body and the surrounding air. STEINEL specifies 360° detection with a 140° aperture and an adjustable 1–8 m reach. Radar can also detect movement through glass and thin partitions; adjust the reach to the layout so that movement in the intended area controls the light.
Automatic operation with manual control
Reach, twilight threshold and time controls are protected behind the screw-fixed front cover. Set the light-on period from 10 seconds to 30 minutes and choose a 2–2000 lx twilight threshold. Pressing the built-in button provides a four-hour lighting override, after which automatic sensor operation resumes. The same button can select permanent OFF. A red indicator LED shows the manual operating mode.
Choose a compatible lighting load
The switch is intended for indoor wall mounting and a 230–240 V mains connection using L, switched L′ and N. Its IP54 enclosure provides splash protection. The resistive-load rating is 1000 W; the older exact data sheet gives a 500 W fluorescent-load rating. For LEDs and electronic ballasts, observe the manufacturer's limits: a minimum 20 W load, no more than four lamps and a combined capacitance of up to 88 μF. The 1000 W resistive rating is not an LED power rating.
