Steinel
STEINEL IS 2140 ECO wall motion detector, 140°, up to 14 m, IP54, black — 034689
46.50€Ex Tax: 38.43€
STEINEL IS 2140 ECO wall motion detector, 140°, up to 14 m, IP54, white — 034672
46.50€
Ex Tax: 38.43€
Viewed 10288 times
Collection and delivery time
Estimated sourcing to our Riga store: 2 - 3 business days.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
Categories
Cart
Account
Search
Recent View
Go to Top
All Categories
×
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Shopping Cart
×
Your shopping cart is empty!
Search
×
Recent View Products
×
Item specifics
- Sensor type Passive infrared (PIR) motion sensor with ambient-light measurement
- Installation Surface wall mounting; indoors and outdoors
- Reach Tangential up to 14 m (239 m²); radial up to 3 m (11 m²); distance from the sensor
- Detection angle 140°
- Optimal mounting height 2 m
- Maximum mounting height 3 m; specified range 1.8–3 m
- Time setting 8 s–35 min — switch-off delay after the last movement; current data sheet
- Twilight setting 2–2000 lx — adjustable ambient-light threshold (current data sheet)
- Sensor system Aim the detection field using the adjustable head: 180° horizontally and 90° vertically; further restriction with masking
- Sneak-by guard Yes — detection below the sensor
- Segment masking Supplied masking elements exclude unwanted detection sectors
- Manual override An external changeover switch can provide continuous light as shown in the wiring diagram; no automatic 4 h override timer is specified
- Watt-o-matic No — no dimming or low-level background light
- Relay load Manual: incandescent/halogen lamps up to 1000 W. Data sheet states 2000 W resistive; obtain manufacturer confirmation before using a higher load.
- LED load (W) Total load: LED <2 W — 100 W; LED >2 W and <8 W — 125 W; LED >8 W — 250 W; up to 50 lamps; capacitance ≤132 µF
- Parallel connection Wired interconnection according to the manufacturer’s diagram; no wireless networking
- Output type Relay; switched mains live L′ to the light, not a potential-free contact
- Interface & control On/off control of one lighting circuit; settings on the detector; no Bluetooth
- Settings Two potentiometers: time delay and light threshold; detection field aimed mechanically
- Voltage 230 – 240 V / 50 – 60 Hz; live L and neutral N required
- Operating temperature −20…+50°C
- IP rating IP54
- Dimensions (W×H×D) 83 × 99 × 86 mm (length × width × height)
- Accessories Corner mounting bracket — optional, sold separately
- Warranty 5-year manufacturer warranty, subject to STEINEL terms
- Colour / RAL White; RAL 9010
- In the box 1 detector, mounting base and masking elements; corner bracket not included
- Manufacturer SKU 034672
- EAN 4007841034672
Product Description
STEINEL IS 2140 ECO is a white wall-mounted PIR motion detector for automatic lighting indoors and outdoors. 140° coverage and up to 14 m tangential reach suit entrances, paths, terraces and driveways. The adjustable sensor head helps aim the detection field precisely. Article 034672, EAN 4007841034672.
Understanding detection
- Up to 14 m tangentially (239 m²): detection is most reliable when a person moves across the field.
- Up to 3 m on direct approach (11 m²): moving straight towards the detector gives a shorter range. These distances are measured from the sensor, not across a full circle.
- Adjustable coverage: aim the head and mask unwanted sectors to exclude a neighbouring path or road.
Sneak-by protection covers the area below the detector. The 180° horizontal swivel and 90° tilt help aim coverage at a narrow entrance or along a building wall.
PIR detects heat from moving people or animals; it cannot detect through glass or walls. Maximum reach depends on movement direction, installation height and ambient temperature. Keep the view clear and avoid aiming at nearby lights or other heat sources.
Settings and lighting control
- 8 s–35 min delay: light remains on for the selected period after the last detected movement; new movement restarts the timer.
- 2–2000 lx threshold: sets how dark the surroundings must be for movement to switch the light on. A lower setting is for darkness; a higher setting also permits operation in brighter conditions.
- Potentiometer settings: time delay and brightness are adjusted on the detector. There is no Bluetooth connection or app.
- Relay on/off operation: switches one lighting circuit without dimming or background lighting.
An external changeover switch can provide continuous light according to the manufacturer’s diagram. This is not an automatic four-hour override timer. Multiple detectors can be interconnected by cable as shown in the wiring diagram; this does not increase the permitted lighting load.
Electrical specifications and switching loads
Supply: 230 – 240 V / 50 – 60 Hz. Live L and neutral N are required; the light receives switched live L′. The output is not a potential-free contact.
| Incandescent/halogen lamps | Up to 1000 W according to the manual; see clarification below |
|---|---|
| Low-voltage halogen lamps | 1000 VA |
| LED lamps <2 W | 100 W |
| LED lamps >2 W and <8 W | 125 W |
| LED lamps >8 W | 250 W |
| Number of lamps | Up to 50; the relevant total power limit also applies |
| Total capacitance | Up to 132 µF |
| Fluorescent lamps, electronic ballast | 250 W |
| Fluorescent lamps, uncorrected | 500 VA |
| Fluorescent lamps, series-corrected | 1000 VA |
| Fluorescent lamps, parallel-corrected | 500 VA |
Each LED rating is the combined load of all connected lamps in that category. Choose the category by the wattage of one LED lamp. Driver inrush current and capacitance also matter; the resistive rating is not an LED load rating.
Load clarification: the article data sheet specifies 2000 W resistive, while the linked installation manual specifies 1000 W for incandescent and halogen lamps. Plan for no more than 1000 W unless the manufacturer confirms the rating for the supplied version. The lower data-sheet limits of 100/125/250 W are used here for LED loads.
Housing, installation and supplied items
UV-resistant plastic housing; net weight 172 g. IP54 protects against harmful dust ingress and splashing water when correctly installed with the cable seals. Operating temperature: −20…+50°C.
Supplied with one detector, mounting base and masking elements. A corner mounting bracket is optional and sold separately. The controlled light and external switches are sold separately.
5-year manufacturer warranty, subject to STEINEL terms. A qualified installer must complete mains wiring in accordance with the instructions. Clean the lens using a slightly damp cloth without cleaning agents. Manufacturer: STEINEL GmbH, Dieselstraße 80–84, 33442 Herzebrock-Clarholz, Germany; product@steinel.de.
The main photo shows the selected article. Shared application, UV-resistance and bracket illustrations may show another colour; the supplied detector’s finish is stated in the title and specifications. Dimension drawings and wiring diagrams are linked in the manufacturer documents.
