Steinel
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source No
- Voltage 220–240 V AC, 50–60 Hz
- Housing colour Black
- Housing material Aluminium floodlight head with UV-resistant plastic base
- Diffuser material Clear glass
- Dimensions (L×W×H) 184 × 213 × 218 mm (D × W × H)
- Mounting type Wall mounting, indoors and outdoors
- Adjustable head Yes
- Rotation angle (°) 80° (−40°…+40°)
- Tilt angle (°) 150° (−40°…+110°)
- IP rating IP44
- IK rating IK03
- Protection class (electrical) I
- Operating temperature (Ta) −10…+30 °C
- Control method External switch
- Soft light start No
- Replaceable driver No
- Weight 1160 g
- Warranty 3 years
- Wattage 29.5 W
- Luminous flux 2704 lm
- Luminous efficacy (lm/W) 92 lm/W
- Colour temperature (CCT) 4000 K
- Light colour Neutral white
- Colour rendering index (CRI/Ra) Ra 80
- Colour consistency (SDCM) SDCM 6
- Dimmable No
- Energy class F
- Energy consumption (kWh/1000 h) 30 kWh/1000 h
- Rated Lifetime (hours) L70B50 (25 °C) > 36000 h
- SKU 069230
- EAN 4007841069230
- Sensor type No motion sensor
Product Description
STEINEL LS 300 is a black outdoor LED floodlight without a motion detector for driveways, courtyards, garage approaches and side entrances. It suits locations where you want to turn the light on with a switch and keep it illuminated for the task at hand. Its adjustable head helps direct the output towards the area you need to see.
The integrated 29.5 W LEDs provide 2704 lm of neutral white 4000 K light. There is no separate bulb to select because the light source is part of the fitting. The output is useful for seeing the approach to a garage, lighting the area beside a gate or illuminating a service entrance after dark. A ceramic reflector spreads the light from the broad floodlight panel.
Aim the light where it is needed
The aluminium head turns 80° horizontally and 150° vertically, allowing the lighting direction to follow a driveway or nearby working area. This flexibility helps adapt the light without relocating the wall mounting point. When setting its direction, consider the area to illuminate and avoid aiming towards passing traffic or neighbouring windows.
An external switch controls operation through the building’s lighting circuit. There is no built-in motion detection or sensor operating-time adjustment. This makes the version useful for manually controlled lighting that should stay on even when someone remains still.
The construction combines an aluminium head, UV-resistant plastic parts and a clear glass cover. Its IP44 housing is intended for outdoor wall mounting, and installation accessories are included. This is the black non-sensor version, article 069230. It is not dimmable, and the integrated LED module and control gear cannot be replaced.

