NightMatic 2000 twilight switch, white, IP54 (Steinel)
Estimated sourcing to our Riga store: 1-2 days.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Type Twilight switch / photoelectric lighting controller
- Output 1000 W max. resistive load
- Voltage 230–240 V AC / 50 Hz
- Twilight setting 2–30 lx
- Night economy mode No
- Morning setting Off at dawn
- IP rating IP54
- Dimensions (W×H×D) 74 × 99 × 37 mm (W × H × D)
- Ambient temperature −20 … +50 °C
- Wattage Sensor’s own power consumption: 0.8 W
- LED load Electronic ballast: max. 4 × 58 W; total C ≤88 µF at 230 V
- Setup Potentiometer
- Installation Surface-mounted on wall
- Colour white; RAL 9010
- Material UV-resistant plastic
- Warranty 3-year manufacturer warranty; manufacturer terms apply
- SKU 550417
- EAN 4007841550417
Product Description
STEINEL NightMatic 2000 is a white twilight switch / photoelectric lighting controller that turns connected lights on as darkness falls and off again at dawn. Use it to control façade, entrance, courtyard, garden or shop-window lighting. It responds to ambient brightness rather than movement.
A straightforward choice when lighting should remain on throughout the dark hours. There is no need to operate a switch every evening, and the lights turn off automatically as daylight returns.
Practical features
- Adjustable 2–30 lx threshold: use the potentiometer to choose how dark it must be before lighting switches on. A lower setting activates the lights later, in darker conditions.
- IP54 and UV-resistant plastic: the housing is suitable for outdoor installation and protected against splashing water.
- 230–240 V / 50 Hz: wired connection to the mains and controlled lighting; no Bluetooth app or smart-home hub is required.
- Compact housing: 99 mm high, 74 mm wide and 37 mm deep. Surface-mounted on a wall; mounting accessories included.
Connected load: up to 1000 W resistive. For light sources with electronic ballasts, the manual specifies no more than 4 × 58 W and a total capacitance of up to 88 µF at 230 V. These conditions also apply to LED connections; the 1000 W rating must not be applied to LED lighting.
Install where the sensor can detect daylight without direct illumination from the light it controls. Operating temperature: −20 to +50 °C; own consumption: 0.8 W. 3-year manufacturer’s warranty, subject to STEINEL’s terms.
Also available in black.
