ARNE-LED outdoor wall light 2xGU10 Satin Chrome (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Replaceable LED bulb(s)
- Replaceable light source Yes — replaceable bulb
- Number of bulbs 2 bulbs
- Max. power Included bulb(s): 2 × 5 W; maximum replacement bulb wattage not separately confirmed
- Voltage 220–240 V AC, 50 Hz
- Housing colour Satin Chrome
- Housing material Steel
- Light direction Upward and downward
- Adjustable light direction Fixed light direction
- Dimensions (L×W×H) 63 × 120 × 170 mm
- Mounting type Wall mounting
- Height adjustable No separate height adjustment
- IP rating IP44
- Protection class (electrical) Class I
- Lamp has a switch No built-in manual switch
- Control method External wall switch (not included)
- Dimming method Not dimmable; do not connect to an external dimmer
- Weight 700 g
- Warranty 2 Years
- Wattage 2 × 5 W = 10 W (source total)
- Luminous flux 2 × 350 lm = 700 lm (sum of source ratings)
- Colour temperature (CCT) 2700 K
- Light colour Warm white: 2700 K
- Beam angle 38°
- Colour rendering index (CRI/Ra) 80
- Mains frequency 50 Hz
- Dimmable No
- Energy class G
- Rated Lifetime (hours) 30000 h
- SKU 14867/11/12
- EAN 5411212143976
- Socket GU10 (MR16)
- Sensor type No motion sensor
- Light source Replaceable LED bulb(s)
- Included Yes — LED bulb(s)
Product Description
Lucide ARNE-LED is an outdoor wall light with a vertical cylindrical body. Light travels upwards and downwards, highlighting the facade on both sides of the fitting. This suits a terrace wall, an entrance area or a decorative facade accent. The compact side mount holds the body away from the wall to define the lighting pattern.
The body is made of steel with a satin chrome finish. The manufacturer specifies an electro-galvanised coating and a glossy surface; the metallic tone complements other outdoor metal details. The mounting base is steel.
LED bulbs are included. The fitting uses GU10 (MR16) lamps; the source count is 2. Each supplied bulb is rated at 5 W with an output of 350 lm. Total nominal source power is 10 W and the sum of both bulb outputs is 700 lm. Warm-white 2700 K light suits a welcoming outdoor atmosphere. CRI 80 provides everyday colour rendering, while the source’s 38° beam angle creates a focused accent in the chosen area. Bulb wattage describes the supplied source, rather than a verified maximum wattage for a replacement. Replace the bulb according to the fitting’s markings and instructions.
The fitting and supplied bulbs are not dimmable. An external switch turns the light on and off; this version has no motion or twilight sensor. The light colour does not change. The lighting direction is fixed and the height is not adjustable. Choose the mounting position to create the required lighting pattern.
The cylindrical body is 6.3 cm in diameter; overall height is 17 cm and projection from the wall 12 cm. The wall plate is 6.3 cm wide, 2.5 cm deep and 10 cm high. Net weight is 0.7 kg. Use these dimensions to plan clearance from paths, walls or planting and leave access for bulb replacement.
Power is supplied from a 220–240 V AC mains connection at 50 Hz; nominal voltage is 230 V. No power cable or plug is attached; connect it at a prepared installation point. Electrical protection Class I requires protective earthing. Make the connection and install the fitting according to its specific instructions, with power disconnected before work.
IP44 protects against solid foreign objects larger than 1 mm and splashing water. The fitting is intended for outdoor use with the housing properly closed and the electrical connection protected; it is not intended for immersion or water jets. The manufacturer states a supplied LED-bulb lifetime of 30 000 h and energy efficiency class G on the A–G scale. Lifetime is a nominal source rating, not the warranty period.
The package includes the fitting, the specified LED bulbs and the manufacturer’s installation materials. An external switch is not included; choose fixings suitable for the mounting surface. Lucide lists 49008/05/60 as a recommended replacement source. The store’s stated warranty period is 2 years.
