LUTON solar outdoor wall light with PIR motion and day/night sensors, solar LED, 2 W, 100 lm, 2700–3000 K, black (Lucide)
Estimated sourcing to our Riga store: ~2 weeks.
Delivery to your address is counted from dispatch; for products on order, add it to the sourcing time. The carrier time is shown with the delivery method at checkout.
Quantities above available stock require sourcing of the remaining units. Check the information in your cart.
For collection, wait for confirmation that your order is ready.
- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- LED strips and profiles
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Light source type Integrated LED
- Replaceable light source Integrated LED module; not a user-replaceable bulb
- Number of bulbs 1 integrated LED source
- Max. power 1 × 2 W
- Housing colour Black
- Housing material aluminium
- Light direction Diffuse light around the fitting
- Adjustable light direction Fixed light direction
- Dimensions (L×W×H) Overall width 130 mm, depth 74 mm, height 134 mm; wall plate 5 × 130 × 134 mm
- Mounting type Wall mounting
- Height adjustable No separate height adjustment
- IP rating IP54
- Protection class (electrical) Class III
- Cable length No mains cable; solar powered
- Lamp has a switch On/off switch on the luminaire
- Control method A: 10% → 100% on motion; B: 50% → 30% after 2 h → 20% after 5 h; C: off → 100% on motion → off after 30 s. Hold 2 s for on/off; press 1 s to change mode
- Dimming method Built-in solar/sensor operating modes; not an external phase-cut dimmer
- Weight 530 g
- Warranty 3 Years
- Luminous flux 1 × 100 lm
- Colour temperature (CCT) 2700–3000 K manufacturer-declared warm-white range; not adjustable
- Light colour Warm white 2700–3000 K; no colour-temperature selection
- Beam angle 197°
- Colour rendering index (CRI/Ra) 80
- Voltage 3.7 V battery; solar charging; no 230 V mains connection
- Dimmable Yes — automatic low/high-light operating modes; no external dimmer
- Energy class Not specified
- Rated Lifetime (hours) 25000 h
- Switching cycles 30000
- Full product code 15815/01/30
- EAN 5411212152107
- Output power 1 × 2 W
- Socket Integrated LED module; no replaceable bulb socket
- Included Yes — integrated LED source
- Type Integrated LED
- Sensor type PIR motion sensor and day/night light sensor
- Twilight setting 15 lx; day/night operating threshold
- Power source Solar panel and rechargeable battery
- Battery technology Lithium-ion (Li-ion)
- Battery voltage (V) 3.70 V
- Battery capacity (mAh) Manufacturer-declared 2200 mAh; 2 cells; per-cell/pack scope not stated
- Number of batteries 2
- Battery included Yes
- Replaceable battery No — manufacturer specifies a non-replaceable battery
- Charging method Integrated solar panel; no mains wiring
Product Description
Lucide LUTON is a solar-powered outdoor wall light. It has a wedge-shaped body with a sloping solar panel and light along its upper edge; matt black powder-coated aluminium creates a restrained accent on a façade, fence or beside a terrace. It is useful where mains wiring is unavailable but the solar panel has access to daylight.
The integrated LED source has a rated power of 2 W and output of 100 lm. The manufacturer lists a warm-white range of 2700–3000 K; colour temperature is not user-adjustable, so this does not mean selectable light colours. CRI 80 describes colour rendering and helps you assess how façade materials and plant colours will appear, while the 197° beam angle describes source light distribution. The body does not rotate and its height is fixed.
PIR motion and day/night sensors work with three built-in brightness modes. Hold the button for 2 s to switch on or off and press for 1 s to change mode; the initial setting after switch-on is Mode A. The manual specifies a dusk threshold of 15 lux. Dimming is handled by these lamp modes, without an external dimmer.
In Mode A, below the dusk threshold the light stays at 10 % and rises to 100 % when motion is detected. Mode B does not use motion detection: initial brightness is 50 %, reducing to 30 % after 2 h and 20 % after 5 h. In Mode C, the light is off in standby, switches to 100 % on motion and turns off after 30 s. These options provide either background light or light only on approach.
Power comes from an integrated solar panel and 2 included lithium-ion batteries. The manufacturer lists battery capacity of 2200 mAh, voltage of 3.7 V and weight of 90 g. The batteries are not user-replaceable. The light-source electrical specification is 4 V, not a mains connection. The light has no external power cable.
Choose a position where the solar panel is not shaded by a roof, dense branches or other obstructions. Available sunlight, season and operating mode affect charging and actual lighting duration. No single guaranteed number of operating hours after each day’s charging is specified for this variant.
Overall dimensions are 13 × 7.4 × 13.4 cm. The black aluminium wall plate measures 0.5 × 13 × 13.4 cm, and net weight is 0.53 kg. Screw the plate to the wall and secure the body as shown in the installation diagram; placement determines both the illuminated area and sunlight reaching the panel.
Electrical Class III identifies a luminaire operating at safety extra-low voltage. It does not require a fixed mains connection at its installation position.
IP54 provides protection against harmful dust ingress and splashing water. The light is suitable for outdoor use when its seals and connections remain protected; it is not intended for immersion.
The expected LED life is 25 000 h, with a switching endurance of 30 000 switching cycles. These service-life ratings are separate from the luminaire’s 3-year warranty. The LED source, batteries and installation materials are included.