- Indoor lighting
- Outdoor lighting
- Technical lighting
- LED bulbs
- Recessed luminaires
- LED strips
- LED power supplies
- Motion sensors and dusk switches
- Motion sensors
- Other
- Sale
Your shopping cart is empty!
Item specifics
- Recessed depth 76 mm
- Cut-out diameter Ø 35 mm
- Visible trim Ø Ø 43 mm
- Manufacturer SKU 068639
- EAN 4007841068639
- Sensor type Passive Infrared (PIR)
- Optimal mounting height 2.8 m
- Maximum mounting height 5.00 m
- Time setting 5 s – 60 min
- Twilight setting 2 – 1000 lx
- Output type COM1 (relay)
- Voltage 220–240 V AC, 50/60 Hz
- IP rating IP65
- Warranty 5 years
- Detection angle (°) 360°
- Detection range (m) up to 6 × 6 m (tangential); presence 4 × 4 m
Product Description
Steinel IR Quattro MICRO 6m COM1 is an ultra-compact 360° PIR presence detector for discreet recessed ceiling installation. The micro lens (≈15×15 mm) registers even subtle movements, enabling reliable presence control. Coverage up to 6×6 m (36 m²), presence zone 4×4 m. The COM1 version provides a relay output for direct switching on 220–240 V AC. Rated IP65 at the sensor head for use in humid indoor areas. Mounting height: 2.00–5.00 m (optimum 2.8 m).
Where it’s ideal to install
- Small offices and meeting pods – presence detection prevents “lights off” during quiet work.
- Corridors, lobbies, stair landings – 360° coverage supports efficient, hands-free lighting.
- Sanitary rooms, changing rooms, shower anterooms – IP65 sensor head suits humid interiors.
- Hotel circulation and service areas – discreet, flush look and stable presence detection.
- Storage/utility rooms – automatic control without wall switches.
Installation & setup
- Ceiling recessed with spring clips; cut-out Ø 35 mm; recess depth 76 mm; visible rim Ø 43 mm; overall size Ø 43 × 75 mm.
- Supply/output: 220–240 V AC, 50/60 Hz; COM1 relay for direct switching.
- Adjustments: time 5 s–60 min; twilight 2–1000 lx.
Accessories
Available separately, not included in the product package: Steinel Smart Remote, RC8 and RC5 remote controls for convenient parameter setup. Photos may show accessories that are not part of the standard delivery.
Electrical load limits (COM1)
| Load type | Value |
|---|---|
| Switching output 1, resistive | 1000 W |
| Fluorescent lamps, electronic ballast | 500 W |
| Fluorescent lamps, uncorrected | 400 W |
| Fluorescent lamps, series-corrected | 400 VA |
| Fluorescent lamps, parallel-corrected | 400 VA |
| Low-voltage halogen lamps | 1000 VA |
| LED lamps < 2 W | 100 W |
| LED lamps 2–8 W | 300 W |
| LED lamps > 8 W | 600 W |
| Capacitive load | 176 µF |
| Number of LEDs / fluorescent lamps | 8 pcs |
Warranty: 5 years. Always observe the datasheet, wiring diagram and local electrical regulations.