My cart

0 item(s) - 0.00€

  • Your shopping cart is empty!

STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459
STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459
STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459
STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459
STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459
STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459

STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459

207.50€
Ex Tax: 171.49€
Brand:
Product Code: 086459
Availability: Delivery time ~2 weeks
Viewed 26 times

Item specifics

  • Dimming method KNX commands to separate actuators; no phase-cut output
  • Weight 265 g (net)
  • Detection angle 360°; elongated corridor pattern
  • Twilight setting Separate KNX twilight object independent of presence; threshold configured in the actual ETS project
  • Segment masking No; electronic reach and sensitivity adjustment in both directions
  • Output type KNX telegrams; no 230 V load relay
  • Interface & control KNX and Bluetooth Mesh; Bluetooth is not a KNX gateway
  • Settings ETS and supported STEINEL Connect settings
  • Colour / RAL White / RAL 9003
  • In the box Hallway KNX 3.5 AP 086459 detector; luminaires, additional external power supplies/actuators and separate buttons not included
  • Manufacturer SKU 086459
  • EAN 4007841086459
  • Sensor type High frequency (HF), 5.8 GHz; two corridor sensing elements
  • Motion detection 25 × 3 m at 2.8 m; radial and tangential; corridor pattern
  • Application Indoors; corridors and passageways
  • Installation Surface-mounted AP ceiling installation
  • Installation height 2–4 m; optimum 2.8 m
  • Light-level setting 2–2000 lx according to current product page; function parameters selected in the ETS project
  • Voltage 21–30 V KNX bus; do not connect to 230 V
  • Output 30 mA rated KNX current; manual consumption <0.5 W
  • Functions Presence, brightness, temperature, humidity, HVAC, logic; 4 lighting outputs and 2 constant-light channels
  • Housing UV-resistant plastic; white
  • IP rating IP20; intended for indoors
  • Dimensions 123 × 123 × 62 mm (length × width × overall height)
  • Temperature range −20 to +40 °C; common range of page and manual
  • Warranty 5 years subject to manufacturer terms

Product Description

KNX presence detection along a corridor

STEINEL Hallway KNX 3.5 AP is a white surface-mounted detector for indoor ceiling installation. The manufacturer article number offered here is 086459. Its two high-frequency sensing elements create an elongated detection pattern suitable for corridors in offices and other buildings. The detector uses 5.8 GHz HF technology and responds to movement towards the mounting position as well as movement across the monitored area. Hallway is not a TruePresence breathing-micro-movement detector; its corridor coverage should be selected around the movement route and the geometry of the building.

Adjusting the corridor coverage

The manufacturer specifies a 25 × 3 m detection area at a mounting height of 2.8 m, within an installation range of 2–4 m. Although the coverage angle is given as 360°, this describes a narrow corridor pattern rather than a circular area with a 25 m diameter. Reach and sensitivity can be adjusted separately for each direction. The letters in the STEINEL logo provide an orientation reference when assigning the settings. HF movement detection may extend through glass, wood or lightweight partitions, so commissioning should include tests at both corridor ends and beside adjoining rooms. Electronic adjustment helps reduce unwanted triggering; mechanical masking of individual segments is not provided on this model.

Brightness measurement and lighting logic

This white version includes internal mixed-light measurement, which can be used by the lighting logic and transmitted to the KNX bus. The application provides up to four lighting outputs and two constant-light control channels. These are logical communication objects: appropriate KNX actuators execute their commands. A separate twilight output responds to measured brightness independently of occupancy, with the threshold configured in the actual ETS project. This produces a switching telegram for an external actuator rather than switching a mains load inside the detector. During commissioning, the ceiling-mounted light measurement should be related to the actual room and the required lighting level rather than treated as an identical reading at every point along the floor.

Bus supply and building control

The detector connects to the 21–30 V KNX bus and does not contain a mains lighting relay. The current article page specifies a rated current of 30 mA; the power supply must be selected for the requirements of the entire bus line. Alongside occupancy information, the application supports room temperature and relative humidity values, HVAC control information and logic functions. The operating manual specifies a temperature measurement range of 0–40 °C and relative humidity measurement from 0–100 %. These values are intended for building automation, with the required objects enabled, addressed and configured as part of the installation design. Luminaires, a KNX bus power supply and the required actuators are separate system components and are not included with this detector.

Configuration and physical installation

The principal KNX functions are configured in ETS. The STEINEL Connect app uses Bluetooth to access supported sensor settings and can add the detector to a suitable Bluetooth lighting system. Bluetooth does not provide communication into or out of the KNX system; the presence of both interfaces must not be interpreted as a protocol gateway. The surface-mounted housing measures 123 × 123 × 62 mm, has a net weight of 265 g and is rated IP20 for indoor use. The full operating manual states an ambient range of −20 to +40 °C, while the current article page states −25 to +50 °C. Without additional manufacturer confirmation, the common range of −20 to +40 °C is the conservative planning limit. Choose a stable mounting position without vibration and check the final response along the intended walking route.

Image context

The main image shows the offered white Hallway KNX 3.5 AP, article 086459. The corridor photograph is a manufacturer application illustration: the exact installed model, interface and colour are not established, and room equipment is not included. The other images show the detection pattern and dimensions for the relevant mounting type.

Manufacturer documents

Saistītās preces

Apskatiet citas izvēles iespējas un šai precei piesaistītos produktus.

STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459

STEINEL Hallway KNX 3.5 AP corridor presence detector, HF, 25 × 3 m, IP20, white — 086459

207.50€